Technical Info‎ > ‎

Technical Info - PC1450

Orbotech PC-1450

 

 

 Inspectable Products 

                                                    Inner layers: signal,  power/ ground,  mixed

 

                                                    buried vias and cross shielding

 

                                                    Outer layers: Drilled holes, SMT, signal, mixed and cross

 

                                                    shielding . Master artwork and phototools (using white background)

 

 

Inspectable Material       Bare copper, resist on copper or laminate, etched or plated copper

 

                                                   Phototools (using white background): silver halide on film, diazo on film

 

                                                        Chrome on glass         

 

Detected Flaws                   Minimum line/space variation; missing excess features,

 

                                                    annular ring violations; opens; nicks; mouse bites;

 

                                                    protrusions; shorts; pin holes; copper specks; dish downs;

 

                                                    wrong size or position of features

 

 Inspection Methods          Design rule check, golden board reference comparison

 

 Option                                    Sampling and Registration; Multi Line Width Measurment;

                               

                                                    No-pin Registration; CDR-14, CAM download reference comparison;

                                               

                                                          RefManager, automated CAM-AOI setup                           

 

 Panel Size                              25”x25” , Inspection area 23.5”x24” 

 

Continuous Resolution    0.25 to 0.9 mils

 

Throughput                        Panel size 18" x 24"; including load/unload

                                                    Resolution (mil)    0.9     0.8    0.7    0.6    0.5    0.4    0.25    

                                                                                  156   154   126   113    93     70      38

 

 Defect Verification            On-system verification, VRS-4i, VRS-4m,  VRS-3i 

 

 Upgrade Path                   Upgrade to PC-1490

 

Dimension and weight :  Scanner:  68"x88"x67"  about  2000 lb.

       Electrical  Cabin:   40"x24"x68"   about  700 lb.

 

Power requirements:  Three-phase (208V) 60 Hz connections: 3.5 KVA.